Link to tech document: generic-scooter-seat-post-assembly-rev2
1. Before installing the seat post on your scooter, it is important to make sure that the saddle itself is secure to the seatpost.
2. The saddle comes installed from the factory, however it necessary to make sure the bolts securing it are properly tightened.
3. Using a 13mm box wrench, tighten the two bolts shown.
4. Push the seat post into the scooter’s frame and secure by tightening the 5mm clamp bolt as shown.
5. The bolt should be tightened until the post is no longer able to rotate.
0 Responses
Stay in touch with the conversation, subscribe to the RSS feed for comments on this post.